How To Remove Watch Links. Look around the wristband of your watch and look for the small arrows on the backside of the band. Remove loose links between the inserts.
The pins only fit back in one way (tip first), so you'll know which end is correct pretty easily. If the pin pops through, just remove it using a small set of pliers or your fingers. Repeat this process until you have removed all the links.
Take The Pin Out From Straps.
Once in place, rotate the handle clockwise to bring the pusher towards and into the pin hole. With the clasp done up, pinch it at the side and. The pins only fit back in one way (tip first), so you'll know which end is correct pretty easily.
Collect All Of The Extra Links On The Underside.
Remove loose links between the inserts. If the pin pops through, just remove it using a small set of pliers or your fingers. Remove all the links that you have earlier identified.
Look For The Arrow Mark Under The Strap.
Wrap the band around your wrist and hold the disconnected ends together with your other hand. At this stage, you can determine if you need to remove more links from the watch band. Now it’s time to remove your links!
The Most Important Thing To Remember Is Not To Remove All The Links From One Side Or Your Watch Clasp Will Look Weird.
To begin, you’ll need to select a location with ample light. 3) tap on the correct side. *make sure you take an equal amount of links from each side of the band.
Now, For Removing The Links, Place The Bracelet On The Pin Remover So That The Pin Pusher Lines Up With The Pinhole.
These arrows show in which direction the cotter pins should come out. Once in place keep rotating the handle until the pin pushes out. Turn the screwdriver in a counterclockwise motion to remove the screw.